If you’re looking for a real-world review of the JFJ Easy Pro disc repair machine, this is it.
"How Do You Get Your Discs to Look So Good?"
JFJ Easy Pro disc repair
That’s a question I hear a lot in my shop. Whether it’s old video games, DVDs, or Blu-rays, people are always surprised when I hand them a disc that looks almost brand new—even when it started out looking like it had been through a sandstorm.
I don’t use any special tricks or weird home remedies. I use the JFJ Easy Pro disc repair.
Now, before you roll your eyes thinking, "Oh great, another sales pitch," let me stop you right there. I’m not here to sell you anything. This is just my honest experience with a machine I use almost every day—one that’s saved me hundreds (if not thousands) of discs over the years.
Why I Started Using the JFJ Easy Pro disc repair
If you deal with discs in any capacity—selling, collecting, trading, or just keeping your own collection alive—scratches are a nightmare.
Before I got the Easy Pro, I tried everything:
- Microfiber cloths and cleaning sprays? Only good for smudges.
- Toothpaste and baking soda tricks? Don’t even bother.
- Cheap resurfacing kits? More like disc-destroying kits.
I needed something that actually worked. Something reliable that didn’t leave discs looking worse than when they started.
So, I bought the JFJ Easy Pro disc repair—and I haven’t looked back since.
The JFJ Easy Pro disc repair system is what I use every day in my shop.
How It Works (And Why It’s Different)
The JFJ Easy Pro disc repair isn’t some gimmicky "magic" device. It’s a real resurfacing machine—the same kind that video game stores and rental shops used for years.
Here’s why I swear by it:
✅ It actually removes scratches, not just covers them up.
✅ It works on CDs, DVDs, Blu-rays, and even game discs (PS2, Xbox 360, etc.).
✅ The process is fast—most discs take only a couple of minutes.
✅ It’s easy to use, even if you’re not a repair expert.
The Process – How I Use It Daily
If you walked into my shop and asked, "Can you fix this?" here’s what I’d do:
- Inspect the disc – Light scratches? Deep gouges? Just smudges?
- Apply the right compound – JFJ sells different resurfacing compounds, and which one I use depends on the damage.
- Run it through the machine – Depending on how bad the scratches are, I might run it for 10 seconds or up to a full minute.
- Buff and clean it – After the process, I wipe it down, check the surface, and do another round if needed.
- Test it – I always test game discs to make sure they actually work.
Most of the time, one cycle is enough. But for really bad discs? A second run does the trick.
Does It Work on Every Disc?
No. If a disc is cracked, it’s done. No machine can fix that.
But for heavy scratches, scuffs, and surface wear? The JFJ Easy Pro has saved discs I thought were dead. I’ve even restored rare and valuable games that I would have otherwise had to throw away.
The Downsides (Because Nothing is Perfect)
No machine is 100% flawless, and the JFJ Easy Pro disc repair has a couple of quirks you should know:
- It’s a bit messy. The resurfacing compounds can get everywhere if you’re not careful. I keep paper towels nearby.
- Blu-rays take longer. Because of their harder coating, Blu-rays need extra time and more passes.
- It’s an investment. The machine itself isn’t cheap, and you’ll need to buy buffing pads and compounds over time. But if you restore or sell discs regularly, it pays for itself fast.
"When it comes to fixing scratched discs, the JFJ Easy Pro disc repair process is simple but effective."
Final Thoughts – Is It Worth It?
If you only need to fix one or two discs, then no—you’re probably better off finding a local game store that offers resurfacing like Kilroy Was Here.
✅ Collect video games or movies
✅ Buy and sell discs regularly
✅ Want a reliable way to restore your collection
Then yes—this is the machine I swear by.
I’m not here to convince you to buy it. I’m just telling you what works for me. If you walked into my shop today and asked, "How do you get your discs looking so good?"—this is exactly what I’d say.
And if you do want one, here’s where you can get it for the same price I paid:
👉 📖 Read: Get Yours JFJ Easy Pro disc repair Here
Further Reading & Resources
🎥 How to Use the JFJ Easy Pro – YouTube Tutorial
ML Lamp is the owner of Kilroy Was Here. After his 20 years of working in Las Vegas in the entertainment promotions field, Mr. Lamp retired in 2002 from his job to pursue his passion for collectibles. Now as a guest speaker and author he’s living the dream, and sharing his warmth with You.